All A new category has been added to post all these little tricks you do to make your hobby life easier and you would like to share.
You are browsing archives for
Author: Yves Bernier
Shack Clean-up June 2016
Richard VK2ARN, Russell VK2BYN, Bob VK2RL and myself VK2AUJ conducted a special “seniors” working bee Wednesday 22-Jun-2016 to clean up the shack. We’ve emptied it all, cleaned the shelves and re-intalled only the operational gear. All hand mikes have been provided with a hook. Most radios are permanently connected to a suitable power source and a suitable […]
Vanity Power
Looking for 12v power for your Bluetooth or dashcam? I’ve connected mine to the vanity mirror lights in the sun visor? Uses far less power than the 2 incandescent lights. In our car it is switched with the ignition – not the accessories somehow. Just need to plug before the light on/off switch. So no wires from the top of the windscreen […]
Anderson Y
I use Anderson plugs for all my 12 volt equipment. Except for my HF rig, most of my equipment is of very low current drain. I tend to always terminate my Anderson power leads and extensions with 2 plugs so that I can connect multiple devices, however I don’t like having the spare plug floating […]
Spade adaptor
SLA batteries come with 2 different size spades, narrow 4.7mm or wide 6.3mm. When getting a replacement SLA, you don’t always have the choice on the spade size. You can get away with plugging a 6.3mm female to a 4.7mm male, but the other way around will just not work. I found an easy way to make adaptors, if you don’t […]
Ding-Dong Car Alarm
A couple of xmas ago, some friends stayed at our place and got their car broken into during the night in our driveway, so I decided we needed a car alarm. As an amateur, I went for the homebuilt stuff. I got the cheapest remote door bell I could find ($15 at Bunnings!). Since the remote works on a 12v battery, […]
160m TT Contest Weekend 15-17 July 2016
“Top weekend, well done with the Hangi” Geoff vk2avr. “Great weekend. Well done Mal – you are now a Hangi masterchef. Thanks also to Don and the antenna erection team. Note also the duelling chainsaws!!” Mike vk2uct. It was a great weekend at a great location. We had 12 people staying overnight, 5 people visiting for […]
Aug 2016 – 5th Wed – Technology Made in ANZ
Amazing evening with a total of 64 votes. The winner was John Douglas ZWD. Australia and New Zealand used to manufacture a lot of technology products. This show & tell of any technology products that were manufactured in Australia and New Zealand was a beauty with many equipment tabled that were actually designed and/or built by […]









